Produsert Metal Patio Roofs

Produsert Metal Patio Roofs

Et populært alternativ for villaeiere som ønsker et lite vedlikehold, lettmonterbart takterrasse eller trellis er et produsert metallsystem .

Aluminiums takterrasser holder opp mot tøffe værforhold.

Selv om noen enkle modeller av disse kan være konstruert av erfarne gjør-det-selv-selv, er de fleste typer ment å bli montert av fabrikkansvarlige fabrikanter.

Aluminium er det materialet du velger for boliger fordi det er lettere i vekt, rimeligere og enklere å bruke enn stål.

Stål brukes til kommersielle strukturer (som for eksempel i parker) som til og med tilpasses til privat bruk. Begge materialer er gitt en holdbar pulverlakkert trefarget eller farget overflate med en langsiktig garanti.

Selv om disse strukturene ser på avstand som om de er laget av tre, avslører nærmere inspeksjon deres stemplet metalltekstur. Dette utseendet er avstanden for lett vedlikehold.

Produsert Metal Patio Roofs

FAQ - 💬

❓ What roof is best for patio?

👉 In terms of strength and durability, extruded aluminum is the best patio cover material on the market today. If you want to take your patio or deck to the next level while maximizing outdoor living potential, it's all about choosing the right roofing material.

❓ How do you attach a ledger board to a house for a patio cover?

👉 Attach the ledger with 1/2-inch-diameter lag screws or bolts every 16 inches (or as specified by local building codes). Slip stainless-steel washers between the ledger and the siding to allow water to flow behind the ledger. If you can't get behind the joist to cinch down nuts, use lag screws.

❓ Can you put a metal roof on a pergola?

👉 Retractable roof – A retractable roof is great if your pergola has various uses or if you do not want it to be covered all the time. Metal roof – Metal roofs are great for longevity and can have some very pretty options. They may not be the best option if you like to sit outside in the rain, as they get fairly noisy.

❓ How do you insulate a metal patio roof?

👉 How To Insulate An Aluminum Patio Roof [A Complete Guide]

  1. Remove loose dirt and debris from the roof using an appropriate cleaning solution.
  2. Patch the cracks and gaps in the roof.
  3. Attach the fiberglass batts.
  4. Place and secure the foam insulation and its edges.
  5. Finish the project by applying a coat of paint.

❓ What material is best for patio cover?

👉 If you want a patio cover that doesn't need to be sanded or repainted every few years, go with vinyl. High-quality vinyl is more durable than wood as it's less likely to rot, peel or crack.

❓ What is a patio roof called?

👉 The word pergola has come to be used interchangeably with patio cover. Patio cover. An attached structure that provides shade and/or rain coverage for a patio or deck. A patio cover may have an open or solid roof. The term patio cover is often used interchangeably with pergola.

❓ Does a ledger board need flashing?

👉 How to Flash a Deck Ledger Board. If you cut out your siding to install a ledger board, careful steps must be taken to ensure that moisture cannot reach your house. Infiltrating rainwater can travel downward, sideways and even upward, so special flashings must be used.

❓ How far apart should posts be for a patio cover?

👉 Common Post Spacing The smallest beams for patio covers are typically 4-by-6. In general, the maximum span for a 4-by-6 beam is 6 feet between 4-by-4 posts. If you move up to 4-by-8, you're usually allowed to span up to 10 feet between posts. A 4-by-10 can usually span up to 12 feet between posts.

❓ What is the best roof to put on a pergola?

👉 Aluminum and steel are suitable roof options. If you want a lightweight roof that is resistant to rusting, an aluminum pergola is a better option. However, if you don't mind a heavier cover, a steel roof is ideal for resisting strong winds, heavy rain, and locations that have harsher weather.

❓ Do you need planning permission for a pergola with a roof?

👉 You will need planning permission for your pergola if it's on the front of your house. You will need planning permission for your pergola if it is in a conservation area, on the side of your house between the house and the boundary wall.

❓ Do you need plywood under a metal roof?

👉 Although it may seem counterintuitive, metal roofing can be attached directly to your building's roofing structure without the need and expense of plywood sheeting.

👉 There are patio roofs from varying types of metal, such as steel, waterproof corrugated metal, galvalume aluminum, and more. Check these metal roof patio cover designs and see if you want to adopt or adapt some of the designs as you try to install your own metal patio roof. 1. A Large Standing Seam Metal Roofing Patio Cover Design

👉 The corrugated metal roof at this patio is attached to the bottom side of the 2 x 8 rafters. The designers then attached exposed wood beams to the bottom of the said rafters. The purpose is to hide the edges of the corrugated metal. Pretty sophisticated, isn’t it?

👉 The sheets of metal are strong enough to provide you with lasting protection from the natural elements. Plus, you won’t have to worry about it rotting, cracking, or warping. You’ll need a frame for the metal to mount on, and that tends to be wood. Metal conducts heat well, which means it can get hot under your new patio roof.

👉 Decking your deck with a canopy-style patio roof would give your deck a shaded area conducive to relaxing. This is the best option among the patio roof ideas if you want to let in some sunlight while still protecting the elements and getting that refreshing breeze.


Forfatteren Av Artikkelen: William Larsen. Uavhengig konstruksjon og teknisk ekspert. Erfaring i byggebransjen siden 1980. Faglig kompetanse i retninger: konstruksjon, arkitektur, design, husbygging.

Video Instruksjon: Cover Patios.


Del Med Vennene Dine
Legg Til En Kommentar